Wall Panel

Specifications

The walls shall be 3” thick composite sandwich panels. The interior and exterior facing shall be .021 Stucco Embossed Aluminum Sheets. The core shall be 2 7/8” of one pound density polystyrene laminated using a structural adhesive. Every 4’ will have an aluminum extruded binder post with snap cover to house all the electrical components. All binder posts will be painted to match the wall covering.
The walls shall be 3” thick composite sandwich
panels. The outside facing shall be 0.090 stucco
embossed FRP class C in white. The core shall
be 2.8” of one pound density polystyrene
laminated using a structural adhesive. The
inside facing shall be .090 stucco embossed
FRP class C in white.
The walls shall be 3” thick composite sandwich panels.
The outside facing shall be 5/8” Type X Fire-shield
gypsum board with a vinyl finish of light cream, white
or grey bonded to a 1/8” SoundStop Fiberboard. The
inside facing shall be 5/8” Type X Fire-shield gypsum
board with a vinyl finish of light cream, white or grey
bonded to a 1/8” SoundStop Fiberboard. The core
shall be 2” of one pound density Polyisocyanurate
laminated using a structural adhesive.
The walls shall be 3” thick composite sandwich panels.
The exterior and interior facing shall be 1/2” Vinyl
Covered Gypsum Board. The core shall be 1 15/16”
of one pound density polystyrene laminated using a
structural adhesive. Every 4’ will have an aluminum
extruded binder post with snap cover to house all the
electrical components. All binder posts will be painted
to match the wall covering. Density is 1 lb per cubic
feet.
The walls shall be 3” thick composite sandwich panels.
The exterior and interior facing shall be 26 gauge stucco
embossed steel laminated to 5/8” Type X Gypsum Board.
The core shall be 2” of mineral wool insulation. There shall
be a 20 gauge steel stud every 16”. Every 4’ will have an
aluminum extruded binder post with snap cover to house all
the electrical components. All binder posts will be painted to
match the wall covering.
The walls shall be 3” thick composite panels. The exterior facing shall be 26 gauge stucco embossed steel bonded to a 1/8” tempered hardboard shock plate\ with the interior facing shall be 5/8” Type X fire-shield gypsum vinyl finish of light cream, white or grey bonded to a 1/8” tempered hardboard shock plate. The core shall be 2” of one pound density Polyisocyanurate laminated using a structural adhesive.
The walls shall be 3” thick composite sandwich panels. The exterior and intereior facing shall be 26 gauge stucco embossed steel laminated to 1/8” Hard Board. The core shall be 2 5/8” of polystyrene foam. There shall be a 20 gauge steel stud where needed to support wall attachments. Every 4’ will have a c-channel and divider strip which acts as connections and water barrier between panels
The walls shall be 3” thick composite sandwich panels. The interior facing shall be .090 gauge stucco embossed FRP laminated to 1/8” hardboard. The exterior facing shall be 26 gauge stucco embossed steel laminated to a 2.8” polystyrene core. Every 4’ will have a c channel and divider strip system which will act as a connection and water barrier between panels.

The walls shall be 3” thick composite sandwich panels. The
exterior facing shall be of 26 gauge stucco embossed steel
sheets laminated to 2 5/16” polystyrene core. The interior
facing shall be 1/2” vinyl covered Gypsum Board laminated to 1/8” hardboard. Every 4’ will have an interior and exterior divider stip as well as a metal c-channel which together will act as a weather-tight connection between panels.
The walls shall be 3” thick composite sandwich panels. The
exterior facing shall be 26 gauge stucco embossed steel, and interior facing shall be 1/2” Vinyl Covered Gypsum Board. The core shall be 2 7/16” of one pound density polystyrene laminated using a structural adhesive. Every 4’ will have an aluminum extruded binder post with snap cover to house all the electrical components. All binder posts will be painted to match the wall covering.
The walls shall be 3” thick composite sandwich panels. The
core shall be 2” of poly-iso foam. The exterior and interior
facing shall be 26 gauge stucco embossed steel laminated
to 1/2” Gypsum Board. Every 4’ will have an aluminum
extruded binder post with snap cover to house all the
electrical components. All binder posts will be painted to
match the wall covering.
The walls shall be 3” thick composite sandwich panels. The
exterior and interior facing shall be Stucco embossed steel.
Thecore shall be 2.875” of one pound density polystyrene
laminated using a structural adhesive. Every 4’ will have an
aluminum extruded binder post with snap cover to house all
the electrical components. All binder posts will be painted to
match the wall covering.
This material is manufactured using a starch-oil woven
roving ballistic grade fiberglass cloth. The cloth is
mechanically injected with a thermoset polyester resin
and placed in a hydraulic hot press, then pressed into flat
rigid sheets up to 4’ X 9’. By using a starch-oil ballistic
grade fiber in the cloth, the ballistic performance is
maximized by consistently achieving a uniform resin to
fiber ratio. This allows the proper ply delamination to
encapture projectiles. This Bullet Resistant Fiberglass
is approved by the U.S. Marshal Service, the General
Services Administration, and complies with NIJ standards.