HVAC – COOLING AND HEATING (SPLIT SYSTEM): EACH

HVAC shall consist of “Split-System” units. These units will be of ample capacity as to allow for approximately 500 square feet per ton cooling and heating. The air handlers will be mounted at floor level for the lower floor of the modular building. All duct work shall be located top of the drop ceiling with penetration only for register access. The compressors for the modular building HVAC shall be mounted external to the existing building with all conduit and refrigerant lines to be properly sealed at all penetrations through the walls. As a minimum all HVAC and related items shall be in accordance with local and state building codes.

Call For Modular Building Solutions 800.636.3873